Spray just sufficient clean water onto the Mop to make it damp. Centre the Advanced G Mop onto the back plate and press it down firmly. Spin it in a bucket to throw out any excess water. Drop some Advanced G3 Liquid onto the panel. Dont use also much compound, an quantity of close to 3cm diameter is a good guide. Spread the G3 onto the panel with the mop. Rest the polisher on the panel with the mop held at a slight angle. If you can put a finger under the lifted side, thats about appropriate. This will also assist to preserve the panel cool for the duration of compounding by letting air pass over the panel. Start off the polisher and operate evenly over the flatted region. It is much better to commence slowly and increase the speed gradually. Farécla Compounds include no fillers and hence the surface defects will be permanently eliminated. Compound the surface till all marks have been removed. Advanced G3 liquid is much more economical than paste compounds, so a small goes a long way. During the process, preserve the Compounding Foam damp by spraying minimal amounts of clean water from a Farécla water spray bottle on the panel. This helps to hold the panel cool and lubricates the compound further. Spray a mist of water onto the surface and finally, wipe the surface meticulously with a Farécla Finishing Cloth.
—————————-
My edited the following,News post: Auto Bras . .
Quickly Track Medium can be employed on its own to restore faded colours and remove swirl marks generated by car washes or as a second stage to Quickly Track Coarse Compound. Following Compounding with Quick Track Coarse Compound and the Quickly Track Double Sided Wool Compounding Pad, switch applicators to the Quickly Track 8 Lambswool Pad and back plate. Start off by applying the Rapidly Track Medium Compound to the Lambswool Pad. Employing the pad against the surface, spread the compound evenly over the function place and commence the polishing machine. Commence the polisher and perform evenly above the flatted region. The Farécla Medium cut method removes the fine scratches generated by the Fast Track Coarse Compound. This product is suitable for all contemporary completely cured paint systems, including OEM finishes.
